Chemical Testing Equipment
Abrasion Testers
Description :-
The apparatus is widely used for testing abrasion resistance of plastic materials. In fact, it has multipurpose usage and can also be used to test abrasion resistance of rubber, paint, plywood, leather and paper.
Abrasion in general, is caused by three main factors: the type of abradant, the surface area; and the force of abrasion on the material.
Applications:
Some of the areas where the abrasion testers finds application are:
- Plastic Industry
- Rubber Industry
- Leather Industry
- Chemical Industry
- Polymer Industry
- Automobile Industry
- Paint Industry
- Paper Industry
- Plywood Industry
Adhesion Tester
Description :-
Applications:
The important features of the equipment are:
* Automobile Industry
* Medical Devices
* Plastic Industry
* Construction Industry
* Chemical Industry
* Paint Testing
* Adhesive Industry
* Sealants
* Laminates
* Cosmetics Industry
* Electronics Industry
* Medical device packaging
* General packaging seal strength
Automatic Pigment Muller
Description :-
The equipment is widely used for accurate and fast evaluation of color strength, color matching, dispersion, particle hardness and particle size, color comparison, tint and tone of paints. It is also used to evaluate the staining power and tone of coloured pigments, used in paints. The leftover of pigments and extenders on sieve, that is used in paints is determined by treating them with linseed oil or linseed stand oil to separate the agglomerates into primary particles and passing the paste obtained after separation through a 63 micron sieve.
The dispersion of pigments along with additives, can be carried out either by hand mulling using a palette knife or by mulling them in an pigment muller.
Applications:
- Paint Industry
- Ink Industry
- Plastic Industry
- Coating Industry
- Cosmetic Industry
- Electronic Industry
- Chemical Industry
Corrosion Cabinet
Description :-
Testing of paints to determine their resistance to environmental elements is very important. There are various factors that, which may corrode or damage paint surfaces. Corrosion occurs in coated surface as a result of prolonged exposure to water or natural environment.
Corrosion Cabinet is an important apparatus used to perform corrosion resistance test of paints and coatings. It is also known as salt spray tester.
Applications:
The corrosion cabinet finds application in the following areas:
* Automobile Industry
* Construction Industry
* Aviation Industry
* Shipping Industry
* Metals & Alloys
Density Measuring Equipment
Description :-
Applications:
There are wide applications of density measuring equipment. Some of the areas where they are popularly used are:
- Plastic Industry
- Rubber Industry
- Leather Industry
- Material Testing
- Textile Industry
- Soil Analysis
Dew Point Apparatus
Description :-
Salient Features:
- The apparatus has a sturdy construction.
- There is a closed stainless steel dew point chamber in the instrument containing a highly polished stainless steel “target mirror” along with sample inlet and outlet control valves.
- There is an arrangement for chilling the chamber by a refrigerant, which flows through the outer cooling jacket, thereby preventing any refrigerant contact with the test sample.
- There is a thermometer inserted into the mirror support structure, which provides the temperature of the target mirror.
- The apparatus meets the standard test specifications.
Existent Gum Steam Generator
Description :-
Salient Features:
- The apparatus consists of an aluminum block with ducts for air or steam flow.
- It is easy to install and operate.
- There is an arrangement for electrical heating, which eliminates the need for on-site fuel combustion.
- It requires only a water feed source and electrical hook-up for its operation.
- The apparatus is strongly constructed with long life industrial grade heating element.
- Consists of a full range of safety features like automatic water level control and low water cut-off; high-limit pressure cut-out with manual reset; steam safety valve; and steam pressure gauge.
- It meets international testing standards.
Flash Point Apparatus
Description :-
Applications:
The flash point apparatus, which is mainly used to determine flash point of petroleum products, finds application in the following areas:
- Petroleum Industry
- Industrial Chemical Analysis
- Research Laboratories
- Petrochemical Industry
- Grease, Lubricants Industry
Flexural Strength Tester
Description :-
The flexural strength of a material is defined as its ability to resist deformation under load. flexural strength tester is a machine used to determine the flexure or bending properties of plastic materials. For materials like plastic that considerably deform but do not break, the load at output is marked as the flexural strength or flexural yield strength. The test beam is subjected to compressive stress at the concave surface and tensile stress at the convex surface. The flexural strength is expressed in terms of modulus of rupture.
The machine is widely used for many applications and in various industries.
Applications:
The flexural strength testers are widely used in different areas like:
- Plastic Industry
- Ceramic Industry
- Concrete/Cement Industry
- Rubber Industry
Freezing Point Apparatus
Description :-
Salient Features:
- The apparatus features a direct cooling system, which reduces the need for solvent cooling baths.
- The instrument meets standard international specifications.
- The equipment is easy to use and has a single start or stop push button.
- There are two stages of cooling system in the instrument. One-stage cooling system offers temperatures as low as -35° C and a two-stage cooling system down to -70° C.
- The instrument is easy to install.
Impact Testing Equipment
Description :-
Applications:
The equipment has wide applications in various industries like:
- Plastic Industry
- Paint Industry
- Rubber Industry
- Chemical Industry
- Automobile Industry
Liquid Bath
Description :-
Salient Features:
- The instrument is provided with constant temperature baths for heating oxidation pressure vessels.
- The instrument conforms to the specifications of American Standard of Testing Materials (ASTM).
- There are two types of models available for the instrument.
- There is a two-unit water analog-controlled water bath that can be installed on a table top if required.
- The instrument is equipped with an overflow standpipe or drain to maintain the proper depth when the pressure vessels are introduced.
- Provided with a brass plated reflux condenser to minimize evaporation loss.
- The equipment is supplied with a low liquid level controller.
- The instrument has double-wall insulated construction with support racks, stainless steel tanks, and port covers.
Mandrel Bend Testers
Description :-
Salient Features:
The important features of Mandrel Bend Testers are:
- It consists of a bending lever provided with a roller that revolves on a steel mandrel.
- The mandrel diameter is graduated in millimeter and inches.
- The equipment has a sturdy and rigid construction that provides resistance to deformation and long service life.
- The paint specimen can be bent in part of or along the entire length of the mandrel.
- It is possible to observe the results corresponding to different test diameters in a single operation.
Melting Point Tester
Description :-
Applications:
There are many different applications of Melting Point Apparatus. Some of its common applications are:
- Plastic Industry
- Chemical Engineering
- Medicine Analysis
- Pharmaceuticals Industry
- Research & Analysis
- Perfume Manufacturing
- Dyestuff
- Organic Crystal Substances
Oxygen Index Apparatus
Description :-
Oxygen index apparatus is used to determine the oxygen index of plastic materials.
Salient Features:
The important features associated with the equipment are:
- The apparatus comprises of a test column made of borosilicate glass and supported on a brass base.
- There is a provision for releasing the mixture of oxygen and nitrogen from the bottom of the tube.
- The tube is filled with glass beads for mixing and distributing the gas mixture evenly.
- The equipment is supplied with a specimen holder to hold the specimen vertically in the middle of the test column. The specimen holder is supported in a glass tube fixed at the center of the test column.
- Provided with two rotameters with needle valves to control and measure oxygen and nitrogen flow in the test column.
- Also supplied with a thermocouple probe in the test column above the surface of the beads in order to measure the temperature of the gases inside the column that is indicated on a digital temperature indicator.